I am having problems with my polaris indy 500. last summer i had to replace the track on it, so i took off the secondary clutch,lower chaincase gear, chain,drive axle and bearings on the drive axle.I changed the left side bearing in the drive axle(left side from when you are sitting on the sled)but not the right side.when i put it all back together, i greased the speedometer cable hookup that is down by the axle, put oil in the chaincase, and greased the rear suspension. then after about 50-70 miles, it shreded the belt.after i replaced the belt with the one i got with the sled, it would not go over 20 mph, and when it gets up to 20 mph, the whole sled starts to shake. im wondering if anyone else has had this problem. Any help in identifing this problem would be greatly appreciated.
Loading...